The rebuilding of Austria’s highest railway station – “Schneeberg” – came with major challenges for everyone involved. The most economical solution for the customer was clearly to recycle and reuse the material on site.
This cost-saving option was possible only with a small but high-performance crusher – the RM 60 including final screen, which was able to make the journey up to 1,800 m above sea level on the “Salamander” cog railway. The RM 60 was just as powerful as the small cog railway that carried it to the job site as it processed 5,000 cubic metric tonnes of limestone. The smallest RM crusher handled the entire processing in a single step, thus saving a number of expensive steps: the complex and time-consuming transportation of the natural stone to the valley on the cog railway, forwarding it to a place where it can be recycled and then taking all the construction material back up to the job site on the mountain.
Our crushers in action
RM 60
The RM 60 is the most compact RM crusher and the ideal choice for processing smaller quantities for businesses which are looking to expand their activities and increase profits. Like all RM crushers, the 12 tonne model can also be combined with high-performance pre-screens and post-screens.
Natural rock
Crushing at a high output and low wear, and that in every possible and impossible location, is not an issue for RM crushers. They manage to generate the highest quality value grain from natural stone on site. Depending on the desired combination of machinery. The end result is always cubic aggregate.
Abrasive rock
Quartz gravel, granite and riverbed gravel are not easy to process because high levels of quartz cause high wear. However, RM crushers are designed for such materials: thanks to their compact size they can achieve high throughputs even in tight spaces, producing valuable aggregate directly on site at all times.
Schrefler relies on RM hybrid crusher
Demolition work and mobile recycling have been part of Manfred Schrefler’s range of services since 2016; previously he was known primarily for transport and earthwork. In terms of machinery, the Upper Austrian relies on top quality and always has the very latest technology.
Basalt preparation
Crushed basalt is used for a variety of purposes. Most often, it is crushed to be used as an aggregate in construction projects.
Increase in orders with cuboid final aggregate
In Mexico the RM 100GO! replaces a jaw and cone crusher combination. Basalt with a diameter of up to 500 mm is crushed into different sizes of cuboid final aggregate, which is then reused for asphalt production. Final aggregate grades between 0-19 and 0 25 mm are processed to a high standard without any problems.
RM 70GO! 2.0 crushes hard river basalt
The first mobile RM crusher in Gorontalo, Indonesia, has been in operation since spring 2017. The new RM 70GO! 2.0 replaces several machines at once: instead of using the jaw crusher combined with a cone crusher, this mobile crusher unit processes extremely hard river basalt in a single pass.