Manoeuvrable, mobile, easy to commission and environmentally friendly. These criteria were decisive for the recycling centre operator Solid Waste Recycling Company P.C. from Larisa, Greece, when purchasing their crusher for the first time from the Greek RM sales partner Helma SA. The RM 70GO! 2.0 was just what they needed.
| Country: | Greece |
| Machine: | RM 70GO! 2.0 |
| Material: | C&D waste |
| Infeed size: | 400 mm |
| Final aggregate size: | 0-35 mm |
The RM impact crusher has now been crushing around 70 tonnes per hour of construction waste and occasionally asphalt for over six months and processing it into 0-35 mm high-quality final aggregate for resale. And this despite never having worked with a crusher before. The simple handling and commissioning of the RM crusher enables even inexperienced operators to get started immediately. Thanks to the RM GO! principle, which stands for simplicity and efficiency, the crusher can be put into operation within minutes and can be used flexibly for a wide variety of materials as well as for a change of location.
Compactness & Mobility an advantage
In the small recycling yard, manoeuvring and special reversing manoeuvres are difficult or even impossible with large machines. This is where the RM 70GO! 2.0 can fully utilise its advantages. Weighing just 19 tonnes, the RM 70GO! 2.0 is one of the lightest crushers on the market. Thanks to its compact size, it convinces with outstanding manoeuvrability, even when space is limited, and also impresses with its enormous throughput capacity.
Emission levels as low as possible
In Greece, all construction machines must carry special yellow licence plates to be immediately recognisable as complying with the government’s environmental regulations. This is no problem for the RM 70GO! 2.0, because with its extremely low diesel consumption whilst delivering high throughput, it is one of the most sustainable impact crushers in its class.
Over 9000 tonnes of material with a feed size of up to 400 mm have been crushed to date. But that’s not all: due to the high level of satisfaction of the Greek customer, further areas of application for the mobile impact crusher are already being considered.
Our crushers in action
RM 70GO! 2.0
The RM 70GO! 2.0 conjures up to 150 t/h cubic high-quality grain from rubble, asphalt, concrete and natural rock. As a mobile crusher, it is the ideal machine for companies which have discovered recycling as a new and profitable line of business. Easy, compact and powerful.
RM 70GO! 2.0 crushes hard river basalt
The first mobile RM crusher in Gorontalo, Indonesia, has been in operation since spring 2017. The new RM 70GO! 2.0 replaces several machines at once: instead of using the jaw crusher combined with a cone crusher, this mobile crusher unit processes extremely hard river basalt in a single pass.
Proved successful:
RM 70GO! 2.0 for GSL
Groundwork Solutions Limited have updated their operations with an RM 70GO! 2.0 for crushing construction and demolition concrete. After a successful trial period, they purchased the RUBBLE MASTER impact crusher because of its compactness and great performance.
Major contract with RM 70GO!
To crush 15,000 tons of recycling material in a short time while ensuring that the precise quality is achieved is no problem for the RM 70GO! The rapid start-up and straightforward handling made it possible to finish the order working at high capacity.
Natural rock
Crushing at a high output and low wear, and that in every possible and impossible location, is not an issue for RM crushers. They manage to generate the highest quality value grain from natural stone on site. Depending on the desired combination of machinery. The end result is always cubic aggregate.
Abrasive rock
Quartz gravel, granite and riverbed gravel are not easy to process because high levels of quartz cause high wear. However, RM crushers are designed for such materials: thanks to their compact size they can achieve high throughputs even in tight spaces, producing valuable aggregate directly on site at all times.
Schrefler relies on RM hybrid crusher
Demolition work and mobile recycling have been part of Manfred Schrefler’s range of services since 2016; previously he was known primarily for transport and earthwork. In terms of machinery, the Upper Austrian relies on top quality and always has the very latest technology.
Basalt preparation
Crushed basalt is used for a variety of purposes. Most often, it is crushed to be used as an aggregate in construction projects.
Increase in orders with cuboid final aggregate
In Mexico the RM 100GO! replaces a jaw and cone crusher combination. Basalt with a diameter of up to 500 mm is crushed into different sizes of cuboid final aggregate, which is then reused for asphalt production. Final aggregate grades between 0-19 and 0 25 mm are processed to a high standard without any problems.
RM 70GO! 2.0 crushes hard river basalt
The first mobile RM crusher in Gorontalo, Indonesia, has been in operation since spring 2017. The new RM 70GO! 2.0 replaces several machines at once: instead of using the jaw crusher combined with a cone crusher, this mobile crusher unit processes extremely hard river basalt in a single pass.